Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Liebherr specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 936-2938 Book a Diagnostic
Model library · Liebherr Refrigerator

SBS19H0

Liebherr SBS19H0 48-Inch Integrated Side-by-Side Repair

Liebherr refrigerator

Most common issues on this model

  1. NoFrost freezer buildup from a failed defrost heater, sensor or drain
  2. IceMaker water valve or inlet clogged with scale
  3. SoftSystem dampers that have dried and let the doors drift
  4. BioFresh drawers that no longer hold steady humidity or temperature
  5. Door gaskets that have hardened on either column

The SBS19H0 joins an HRB 1110 BioFresh refrigerator column to a 24-inch freezer column, giving a 48-inch integrated pair behind two cabinet panels. It dates from the 2009 PremiumPlus line, so any unit now in a Houston kitchen is well past its warranty and has run through many summers.

A pair means two cabinets, and we treat them as two separate repairs. The freezer side gets the NoFrost check: evaporator frost, the heater, the sensor and the drain. The refrigerator side gets the BioFresh drawers, the fan and the gasket. In both we look at the SoftSystem dampers.

The IceMaker sits in the freezer column, so its inlet valve and fill tube are on our list whenever the ice stops. We quote the price in writing before ordering anything, and we cover the work with a 30-day workmanship warranty.

Key features

  • 48-inch fully integrated BioFresh side-by-side (HRB 1110 plus a 24-inch freezer)
  • Refrigerator 10.8 cu ft with BioFresh; NoFrost freezer 7.6 cu ft
  • PremiumPlus, IceMaker, SoftSystem and LED light columns
  • 2 x 21-5/16 in W, 69-21/32 in H, 21-7/32 in D; Energy Star
→Codes

Error codes this model can show

SBS19H0SBS19H0 questions
Do the two doors need to be serviced at the same time?

Not necessarily. Each column cools on its own, so a repair on one does not require the other. We inspect both gaskets and the seam between the cabinets because a gap there affects both.

Why does the ice maker produce less ice than it did?

A narrowing inlet from scale is the common cause. The valve opens but passes too little water. We test flow, descale or replace the valve, and check the fill tube for kinks.

What does SoftSystem wear look like?

The door closes hard, or it stops short and sits slightly open. Both let humid air in. We replace the worn damper so the door closes gently and seals against the gasket.

Book a visit

Book repair for your SBS19H0

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.

☎ Call the desk ▤ Book a Diagnostic