Liebherr Monolith Code PartyMode: maximum cooling for a big load of cold items

What PartyMode means

On Liebherr Monolith columns such as the MRB 3000, PartyMode runs the cooling at maximum for a large amount of cold items, for example before a gathering. It is a mode, not an alert. It does not switch itself off, so you have to deactivate it manually when you no longer need it, otherwise the column keeps working at the higher cooling effort.

Common causes of PartyMode

PartyMode switched on before an event and never turned off
PartyMode started by an accidental touch
A guest who activated it

✓ One safe check you can try

1. Open the PartyMode setting on the panel. 2. Switch it off manually. 3. Check that the temperature returns to the value you normally use. 4. If the mode will not deactivate, call us and we will look at the panel.

! Why to stop there

The mode is a setting, so a visit is not needed.
A mode that will not switch off points to the touch panel.
Running at maximum for days wastes energy and chills delicate items too hard.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Refrigerator codes

drop symbolLiebherr HC/CS Code drop symbol: time to replace the water filter E1-E8Liebherr IceMaker Code E1-E8: water quantity setting, not an error Electronic Alarm (Failure XX0000)Liebherr Monolith Message "Electronic Alarm": read the failure number and call F1-F5Liebherr NoFrost Code F1-F5: the appliance reports a failure, give us the number HOLIDAYLiebherr Monolith Code HOLIDAY: HolidayMode keeps the refrigerator at 59 F ice maker troubleshootingLiebherr US Code ice maker troubleshooting: five checks when no ice appears IceMaker LED flashingLiebherr HC/CS/HCB Code IceMaker LED flashing: the ice maker is not getting water IceMaker failure / Ice Maker AlarmLiebherr Monolith Message "IceMaker is off": ice production stopped until serviced

PartyModePartyMode questions

What does PartyMode do on my MRB 3000?

It drives the cooling at maximum so a big load of cold items chills fast. It is meant for short use before or during an event, and you end it yourself.

Why is my refrigerator running so hard?

PartyMode could still be on. It does not end automatically, so it keeps the higher cooling until you switch it off on the panel. Turn it off to return to normal running.

Can PartyMode freeze my vegetables?

At maximum cooling, delicate produce close to the cold air gets too cold. Switch PartyMode off once the load is chilled to protect lettuce, herbs and similar items.