Liebherr CS1350 SwingLine IceMaker Repair
The CS1350 is the IceMaker version of the 24-inch SwingLine bottom-freezer, its stainless doors bevelled at the edges and opened with levers. Two things set it apart from the CS1301: the water line to the IceMaker, and a temperature alarm on top of the door alarm. Both have a way of showing wear after many years of Houston use.
If the audible temperature alarm sounds, we do not guess; we read the display, measure the cabinet and look for a door or a seal that is letting heat in. The IceMaker gets a flow test at the valve and the fill tube, since a tube that freezes over produces no ice at all even when the valve is fine.
Because it needs a dedicated 15 A circuit, we also check the outlet. You approve a written price before we begin, and our work comes with a 30-day workmanship warranty.
The alarm covers temperature as well as door position. A rise in the freezer, an open gasket or a power interruption can set it off. We check each cause and read the display.
That points to the water path, not the cooling. We test the supply, the valve and the fill tube for scale or ice, then replace the part that fails the flow test.
It shows a warm-up or power loss that happened while you were away. We use it to see how warm the cabinet got and whether the cause is still present.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.
