Liebherr MW1800 Multi-Temperature Built-In Wine Cabinet to Match Cabinetry Repair
An MW1800 is a built-in multi-temperature wine cabinet, which means different shelves can hold different temperatures. That is helpful for a mixed collection and also means more sensors and airflow paths to keep in good order.
We start by probing each temperature area and comparing the reading with the control. If one is off, we follow the sensor, the damper and the fan that serve it. We then check the condenser air and the door seal. A cabinet that frosts over gets a defrost check. All quotes are written first, and nothing is ordered without your approval.
We keep a written record of the temperatures we measure in each zone, so you can compare them after the repair. Quotes are in writing, and our work carries a 30-day warranty. Bottles stay in place for most checks, and we move shelves only when we must reach the cooling surface.
Zones are meant to differ. If they read the same, a damper or sensor has stopped separating the airflow between them. We test both and restore the difference you set, then confirm each zone with a probe.
We place probes in each area and watch them through a full cooling cycle, then compare the readings with the control. That shows which zone is off and whether the sensor, damper or fan is the cause.
The fan runs along with the compressor and pauses with it. A fan that never runs, or that runs when the compressor is off for long periods, tells us something needs service, and we test it.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.
