Liebherr WF Code S1-S9: settings screens, not problem displays

What S1-S9 means

On Liebherr WF multi-temperature cabinets, S-codes belong to the settings menu rather than the alert system. S1 and S0 in particular are freezer-compartment settings. Seeing an S value therefore means a setting is displayed or selected, and the cabinet itself is working. There is nothing to repair when an S-code appears while you are adjusting the unit, and no call to service is needed.

Common causes of S1-S9

Setup open with a setting on screen
A setting changed during adjustment and left as is
The freezer compartment set to a value you did not intend

✓ One safe check you can try

1. Open the settings menu and look at the S value shown. 2. For the freezer compartment, check S1 and S0 and set the one you want. 3. Leave the menu and wait for the temperature to settle. 4. If settings will not save, call us.

! Why to stop there

A setting is changed in the menu, so no technician is needed.
If the buttons do not respond, the control needs service.
Do not confuse S values with F-numbers, which do mean a failure.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wine Cabinet codes

E1-E8 ice maker water timeLiebherr WF1061 Code E1-E8: ice maker water time you can choose F0Liebherr WF Code F0: multi-temperature unit asks for customer service F0 to F9Liebherr WF1061/WFI1061 Code F0 to F9: contact customer service for any of these FELiebherr WF1061/WFI1061 Code FE: temperature display reads FE, call service Power failure symbol / warmest temperatureLiebherr WF1061 Code Power failure symbol: freezer part warmed during an outage DEMOLiebherr WF/WK Code DEMO: demo mode keeps the cooling circuit off

S1-S9S1-S9 questions

Is S1 a problem on my WF?

No. S1 and S0 are freezer-compartment settings on the WF. They show which option is selected, not that anything has gone wrong, so leave the cabinet running.

How do I change an S setting?

Open the settings menu, step to the S value you want and confirm it. Then let the compartment settle for some hours to reach the new temperature.

How is an S-code different from an F-code?

S-codes are settings you choose. F-codes mean the appliance has a failure and customer service is needed. If you see an F, call us; an S needs only the menu.