Liebherr HC1001 Integrated Refrigerator Repair
Standing 69-3/4 inches tall and 21-15/16 inches wide, the HC1001 fits a standard 24-inch cabinet opening and wears a panel from the kitchen. It has a left-hinged door, no IceMaker, and two independent cooling circuits that keep the 7.1 cubic foot refrigerator and the 2.1 cubic foot NoFrost freezer separate.
Because the circuits are separate, we test them separately. If the refrigerator is warm but the freezer holds, we look at the refrigerator fan, its sensor and the air path. If the freezer is frosting, we turn to the defrost heater. The gasket, the hinges and the alignment of the panel come first, as a door that sits wrong lets humid air in.
We refit the panel square after door work, and you get the price in writing before we start. The repair is covered by a 30-day workmanship warranty.
The refrigerator and the freezer have their own evaporators and controls, so one can stop cooling while the other works. We test each circuit on its own and quote only the one that needs work.
No, it is built without an IceMaker, so there is nothing connected to the water supply. Moisture inside points to the defrost drain or a door seal.
An evenly gapped panel means the hinges and the door are true. We adjust hinge play and level the unit with its feet so the reveal stays consistent.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.
