Liebherr HC1570G Built-In Combination Repair

Owners of an HC1570G live with a combined refrigerator-freezer that sits in a cabinet bank with the panel on the front. With NoFrost doing the thaw work, any ice you see on the back wall is a warning that the cycle is off.
We separate air problems from cold problems. Air problems are fans, ducts and ice; cold problems are the sealed system, which we reach last. Start with a thermometer in the center of each section, compare it with the display, then open the evaporator cover and look. The condenser at the bottom gets a vacuum cleaning when we leave. Pricing is given in writing before work, and each repair carries a 30-day workmanship warranty.
We record the temperature in both sections before and after the repair, so you can see the result and not only take our word for it.
Trust the thermometer in a glass of water. If the display differs from it by several degrees, the sensor has drifted. We test the sensor with a meter and replace it only when it reads out of range.
Please do not. Chipping can puncture the evaporator and turn a small repair into a large one. We thaw it with the unit off, then find why the defrost cycle failed, which means testing the heater and the thermostat.
Vacuum the grille twice a year, and more if you have pets. A clean condenser shortens compressor run time and keeps the unit cooler inside a closed cabinet bank, which extends its life.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.