Liebherr NoFrost Code Power failure LED: freezer got too warm in an outage

What Power failure LED means

On Liebherr US NoFrost units such as the HCB 1560, CBS 2062 and HC 1570G, the power failure LED lights when the freezer section got too warm during a power failure. The Alarm icon then shows the highest temperature that was reached. Read that figure before touching the food, since it tells you how far the freezer climbed and how much of the load has thawed.

Common causes of Power failure LED

A power outage or tripped breaker
A plug or power strip that lost contact
Repeated short interruptions at the outlet

✓ One safe check you can try

1. Read the temperature on the Alarm icon. 2. Check frozen items: hard ones are fine, thawed ones should be cooked or discarded. 3. Confirm plug and breaker are on. 4. Clear the alarm with its button after reading. If the LED returns without an outage, call us.

! Why to stop there

A lit LED that returns with steady power points to the unit's supply.
A technician can verify the freezer holds temperature now.
Do not open panels to chase the cause.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Refrigerator codes

CHECK WATER SUPPLYLiebherr Monolith Message "Water alarm": the shut-off valve needs opening Sabbath modeLiebherr NoFrost Code Sabbath mode: lights and alarms switched off by design Connection failure (WLAN) Failure XX0000Liebherr Monolith Message "Connection failure (WLAN)": SmartDevice link switched off TEMPERATURE TOO HIGHLiebherr Monolith Message "Temperature Alarm": interior got too warm - -Liebherr NoFrost Code - -: two dashes where the freezer temperature belongs DEMOLiebherr Monolith Code DEMO: DemoMode switches the cooling circuit off drop symbolLiebherr HC/CS Code drop symbol: time to replace the water filter E1-E8Liebherr IceMaker Code E1-E8: water quantity setting, not an error

Power failure LEDPower failure LED questions

What does the lit power failure LED tell me on my CBS 2062?

The freezer section warmed too much while power was out. The Alarm icon shows the peak temperature so you can judge how much thawing happened.

Can I refreeze what thawed?

Food that is still cold and holds ice crystals can stay frozen. Fully thawed items or those sitting in liquid should be used right away or thrown out.

How do I turn the LED off?

Read the temperature first, then press the alarm button to acknowledge it. If the LED comes back with no outage, call us because something else is interrupting power.