Liebherr Monolith Code PartyMode: maximum cooling for a big load of cold items

What PartyMode means

On Liebherr Monolith columns such as the MRB 3000, PartyMode runs the cooling at maximum for a large amount of cold items, for example before a gathering. It is a mode, not an alert. It does not switch itself off, so you have to deactivate it manually when you no longer need it, otherwise the column keeps working at the higher cooling effort.

Common causes of PartyMode

PartyMode switched on before an event and never turned off
PartyMode started by an accidental touch
A guest who activated it

✓ One safe check you can try

1. Open the PartyMode setting on the panel. 2. Switch it off manually. 3. Check that the temperature returns to the value you normally use. 4. If the mode will not deactivate, call us and we will look at the panel.

! Why to stop there

The mode is a setting, so a visit is not needed.
A mode that will not switch off points to the touch panel.
Running at maximum for days wastes energy and chills delicate items too hard.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Refrigerator codes

IceMaker LED flashingLiebherr HC/CS/HCB Code IceMaker LED flashing: the ice maker is not getting water IceMaker failure / Ice Maker AlarmLiebherr Monolith Message "IceMaker is off": ice production stopped until serviced no displayLiebherr US Code no display: a blank screen starts with power checks PLEASE CLOSE DOORLiebherr Monolith Message "Door Open Alarm": door open longer than 180 seconds POWER FAILURELiebherr Monolith Message "Power Alarm": power was interrupted Alarm LED / flashing displayLiebherr NoFrost Code Alarm LED / flashing display: temperature climbing too high Power failure LEDLiebherr NoFrost Code Power failure LED: freezer got too warm in an outage CHECK WATER SUPPLYLiebherr Monolith Message "Water alarm": the shut-off valve needs opening

PartyModePartyMode questions

What does PartyMode do on my MRB 3000?

It drives the cooling at maximum so a big load of cold items chills fast. It is meant for short use before or during an event, and you end it yourself.

Why is my refrigerator running so hard?

PartyMode could still be on. It does not end automatically, so it keeps the higher cooling until you switch it off on the panel. Turn it off to return to normal running.

Can PartyMode freeze my vegetables?

At maximum cooling, delicate produce close to the cold air gets too cold. Switch PartyMode off once the load is chilled to protect lettuce, herbs and similar items.