Liebherr Monolith Message "Water alarm": the shut-off valve needs opening

What CHECK WATER SUPPLY means

On Liebherr Monolith MRB, MF and MCB columns such as the MRB 3000, MF 3051 and MCB 3050, the InfinitySwipe panel shows a "Water alarm" with the words "No water in the system". The display uses this mixed-case name rather than an all-caps CHECK WATER SUPPLY. It means the water line is not delivering, and the instruction is to open the water supply shut-off valve. Ice and water features cannot run until water arrives.

Common causes of CHECK WATER SUPPLY

The supply shut-off valve closed
A kinked or pinched water line behind the column
A blocked inlet or filter on the supply
Low or no water pressure in the home

✓ One safe check you can try

1. Find the shut-off valve on the supply line to the column and turn it fully open. 2. Look at the visible hose behind the unit for a kink and straighten it gently. 3. Run a nearby faucet to confirm the house has water pressure. 4. Wait a few minutes and see whether the "Water alarm" clears. If it returns, call us.

! Why to stop there

Once the valve is open and the line is clear, a returning alarm means the inlet, valve or sensing parts inside need a technician.
Water connections hide leak risks, and a mistake behind a built-in column can damage cabinetry.
We confirm the price before any work, with a 30-day workmanship warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Refrigerator codes

Connection failure (WLAN) Failure XX0000Liebherr Monolith Message "Connection failure (WLAN)": SmartDevice link switched off Sabbath modeLiebherr NoFrost Code Sabbath mode: lights and alarms switched off by design - -Liebherr NoFrost Code - -: two dashes where the freezer temperature belongs TEMPERATURE TOO HIGHLiebherr Monolith Message "Temperature Alarm": interior got too warm DEMOLiebherr Monolith Code DEMO: DemoMode switches the cooling circuit off drop symbolLiebherr HC/CS Code drop symbol: time to replace the water filter E1-E8Liebherr IceMaker Code E1-E8: water quantity setting, not an error Electronic Alarm (Failure XX0000)Liebherr Monolith Message "Electronic Alarm": read the failure number and call

CHECK WATER SUPPLYCHECK WATER SUPPLY questions

What does the Water alarm mean on my MF 3051?

It means there is no water in the system. The unit asks you to open the water supply shut-off valve so the ice and water functions receive water again.

I opened the valve and the alarm stays. Why?

The line is still filling, or a kink or blocked inlet restricts the flow. Give it several minutes. If "No water in the system" returns, the problem sits in the supply path and needs our visit.

Does this alarm affect cooling?

No. It concerns the water supply for ice and water features. Food in the refrigerator and freezer compartments keeps cooling normally while the alarm shows.

Liebherr Monolith Message “Water alarm”: the shut-off valve needs opening

What CHECK WATER SUPPLY means

Common causes of CHECK WATER SUPPLY

Other Refrigerator codes

Still seeing CHECK WATER SUPPLY?