Moving a Liebherr Refrigerator: Transport, Leveling and Restart

A Liebherr refrigerator is heavy, finely built and full of parts that do not like rough handling. Whether you are moving across Houston or pulling the unit out for a kitchen remodel, a little preparation prevents expensive surprises.

Before the move

• Empty the refrigerator and freezer completely, and switch the unit off at the control, then unplug it.
• Remove loose shelves, drawers and bins, or tape them firmly in place so they cannot slide.
• Close the water shutoff and drain the line if your model has a water supply. Have the water connection disconnected by someone who knows how to do it without a leak.
• Let frost melt and wipe the inside dry so the door stays free of mold and odors in transit.
• Tape the doors closed with a protective cover, not with tape that touches the finish.

During the move

Keep the cabinet upright whenever you can. If it must tilt, use the position your manual allows, and avoid laying it flat. Use a proper appliance dolly with straps. Never lift by the doors or handles, and protect the floor and the edge of the cabinet at every turn.

Setting up and restarting

Place the unit on a firm floor and level it using the feet. Keep the clearances shown for your model, because a cabinet that cannot breathe cools poorly. After the move, let the refrigerator stand upright for a few hours before you plug it in, so the oil and refrigerant settle. Once it is on, give it time to reach temperature before loading food, and check the display for alerts.

If it does not cool afterward

A unit that hums but stays warm, makes unusual noises, or shows an alarm after a move should be looked at before food goes back in. We check the cooling system, the sensors, the door seal and the leveling, then provide a written price.

Learn more on our refrigerator repair page or check the service area to book. Our work carries a 30-day warranty.